80m Industrial Fog Cannon Sold to Chile

dust control fog cannon
dust control fog cannon
dust control fog cannon
fog cannon machine
fog cannon machine

Dust-control equipment needs to work where the dust is—not only where electricity is available.

For our Chile supply project, the purchasing discussion centers on a practical combination: an 80m industrial fog cannon, a chassis suited to site movement, and optional generator power for locations without a permanent electrical connection.

We approach this as a site-equipment package rather than a standalone spraying machine. Reach matters, but so do water supply, positioning, access, and the ability to relocate as work progresses.

Our public project record identifies a fog cannon solution supplied to a customer in Chile. Trailer, water-tank, and generator arrangements are configurable options; the exact supplied equipment should be checked against the project’s final packing list.

Find the Right Fog Cannon for Your Dust Problem – Free Consultation

Technical Specifications Table for YG Fog Cannons (Customization Supported)

ModelYG-50YG-60YG-80YG-100YG-120
Spray Range50 meters60 meters80 meters100 meters120 meters
Spray Flow8M³8M³12M³12M³15M³
Water Pump Stroke140 meters140 meters160 meters180 meters185 meters
Atomized Particles30-150μm30-150μm30-150μm30-150μm30-150μm
Horizontal Rotation Angle±160°±320°±320°160°0-320°
Up and Down Pitch Angle-5-35°-5-35°-5-35°-10-45°0-60°
Total Power14.5kw24.75kw45.25kw75kw91kw
Power Supply380V  50HZ380V  50HZ380V  50HZ380V  50HZ380V  50HZ
Blower Motor Power11kw18.5kw37kw55kw75kw
Number of Nozzles405880120120

See Factory-Direct Pricing on 80m Industrial Fog Cannons – Request Quote

dust suppression fog cannon
dust suppression fog cannon
water mist cannon
water mist cannon

Customer Pain Points in the Open-Pit Operation

Open-pit mining in Chile creates constant airborne dust from blasting, crushing, stockpiling, and haul road traffic. The customer faced several challenges at once:

  1. Strict environmental inspection on dust levels at the pit and surrounding areas.
  2. Dust suppression needed over a wide area that a small, short-range spray unit could not cover.
  3. Several working zones with no fixed grid power supply, so a unit depending only on mains electricity would be hard to use.
  4. Frequent equipment relocation between benches and stockpile areas, which made heavy fixed towers impractical.

The customer needed one machine that could cover a long horizontal distance, work without relying on an on-site power socket, and be moved between working points easily.

What We Recommended: An 80m Industrial Fog Cannon

We supplied an 80m industrial fog cannon, designed for long-range dust suppression at mining and bulk material sites. The rated throw distance of 80 meters lets a single unit cover a wide work area from one set position, reducing the number of units and repositioning stops.

For this Chile application, the value came from three custom arrangements:

  • Custom chassis: Instead of a fixed base, the unit was configured on a wheeled trailer chassis, with alternative mounting options including a three-wheel chassis, so the customer could tow it between benches and stockpiles. Chassis style is selected according to site terrain and transport access.
  • Optional generator set: A matched generator set was offered so the fog cannon can operate in zones without grid power. The customer could choose between mains power and generator supply based on each working area.
  • Flexible application: Beyond the mine pit, the same unit is suitable for quarries, sand and aggregate stockyards, demolition sites, port bulk material handling, and mine-site dust control.

6 Application Scenarios of YG Industrial Fog Cannon

The 80m industrial fog cannon serves several dust control jobs:

  1. Open-pit mining dust suppression: Control dust from blasting, crushing, and haul roads across a wide pit area.
  2. Quarry rock processing: Suppress dust around primary crushers and screening stations.
  3. Sand & aggregate stockyards: Keep material piles and loading areas from generating airborne dust.
  4. Demolition & construction sites: Reduce dust during building dismantling and earthworks.
  5. Port bulk material handling: Control dust around coal, ore and aggregate transfer points.
  6. Mine-site haul road watering: Cover long road sections to bind fine particles.

Each application is assessed by area size, wind conditions, and required coverage. A single 80m unit does not replace a full mine dust management plan.

Talk to an Engineer Now – Free Consultation

industrial fog cannon
industrial fog cannon
industrial dust suppression cannon
industrial dust suppression cannon

How We Matched Chassis and Power for the Chile Site

When we discussed the machine with the customer, the two key decisions were chassis and power source:

  1. Chassis selection: We reviewed how the unit would move between work zones. A wheeled trailer chassis works when access roads are firm and level. A three-wheel chassis suits lighter, tighter sites. For rough or hilly terrain, a heavy-duty towed or tracked configuration is evaluated. We confirm the exact chassis after the customer shares their site transport conditions.
  2. Power source: We confirmed whether each working zone had three-phase grid power. Where power was unavailable or unreliable, we matched a generator set. The customer can run on grid power where available and switch to the generator in remote zones. Generator capacity and fuel consumption are confirmed with YG for the selected model.

What the Customer Still Confirms Before Final Order

Because no two mining sites are identical, several items remain to be confirmed with YG before the final configuration is locked:

  • Exact coverage area and wind conditions at each working zone
  • Chassis style matched to the site transport route
  • Generator capacity and fuel plan for remote areas
  • Water availability and pump flow at the mine site
  • Delivery port and lead time for the Chile shipment

Why This Approach Helps Buyers Decide

For contractors evaluating a fog cannon, the buying decision rarely depends on the spray unit alone. It depends on whether the unit fits their site power, terrain, and relocation needs. By offering a custom chassis and an optional generator, we give buyers one system they can actually use across multiple dust control zones, rather than a machine that needs a permanent power point to operate. This is the practical value we deliver, and it is the reason the Chile customer moved forward with YG for their dust suppression package.

Get Your Free Quote Today – Fast Response

mist cannon
mist cannon
fog cannon
fog cannon

Frequently Asked Questions About Fog Cannons Sold to Chile

Q1: How much area can one 80m industrial fog cannon cover?

A1: The rated throw distance is up to 80 meters. Actual coverage depends on wind, nozzle pressure, water flow, and the dust source layout. We review your site area before confirming expected coverage.

Q2: Does the fog cannon need a fixed power supply?

A2: No. It can run on three-phase grid power where available, and we offer an optional matched generator set for sites without grid power. Confirm your working zone power conditions with YG.

Q3: Can I get a custom chassis for my site?

A3: Yes. We offer a wheeled trailer, three-wheel chassis, and other mounting options. The final choice depends on your terrain, road access, and how often you relocate the unit.

Q4: How long does chassis customization take?

A4: Production lead time depends on the chassis type and order load. Standard configurations ship faster; customized chassis require confirmation of design and schedule with YG.

Q5: How do I match a generator set to the fog cannon?

A5: We match generator capacity to the fog cannon motor and pump power for your site. Fuel consumption and runtime are confirmed after we know your power needs and usage hours.

Q6: How is delivery arranged to Chile?

A6: We provide export packing and ocean freight documentation to the destination port. The port, shipping schedule, and lead time are confirmed on the order. On-site commissioning support is arranged by agreement.

    Please feel free to give your inquiry in the form below. We will reply in 24 hours.

    Product Model:

    Your Name(required):

    Your Email(required):

    Your Phone(required):

    Your country:

    Your Whatsapp(required):

    Your Message(required):

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Related Post