

BQ identifies a wireline coring system, not a complete rig specification. In a standard BQ arrangement, nominal core diameter is approximately 36.4 mm and standard bit outside diameter is approximately 59.6 mm. Other variants can differ.
Wireline coring retrieves the inner sample assembly through the rods using a cable. The outer drilling assembly remains in the hole during normal sample retrieval.
Before ordering a BQ package, check three levels of compatibility:
- Mechanical fit: rods, threads, spindle opening, chuck, clamps, and adapters.
- Operating capability: torque, speed, feed control, lifting capacity, and circulation.
- Retrieval compatibility: core barrel, head assembly, overshot, cable, and winch.
An overshot is the retrieval tool that connects to the inner assembly. A matching rod size alone does not establish that the complete system will work.
At YG Machinery, this full hydraulic BQ core drilling rig is engineered specifically for wireline core exploration. It is important to clarify: spindle-type core drill rigs can also operate BQ tooling for shallow holes. However, spindle rigs lack the consistent hydraulic power, high lifting capacity, and precise feed control required for deep, high-standard core recovery. This full hydraulic model is the preferred choice when your project demands reliable BQ coring at greater depths, tighter borehole deviation control, and flexible switching across multiple core sizes. Contact YG now to obtain more information about our products.
Get Your Free Quote in 12 Hours
Technical Specifications for YG Fully Hydraulic Core Drill Rigs (Compatible with BQ-Standard Tooling; Custom Configurations Available for Depths up to 400 Meters)
| Model | YGX-400 | YGX-600 | YGX-800 | YGX-1000 |
| Drilling Depth(M) | 180-400-500 | 200-600-650 | 400-800-1000 | 500-1000-1100 |
| Rated pressure(MPA) | 21 | 21 | 25 | 28 |
| Rated Flow(L/min) | 168 | 192 | 260 | 300 |
| Heat Dissipation Mode | Air cooling+water cooling | |||
| Engine Brand | Yuchai | Yuchai | Yuchai | Cummins |
| Rated power/speed | 78kW/ 2400r/min | 92kW/ 2400r/min | 92kW/ 2400r/min | 154kW/2400r/min |
| Drilling Angle(°) | 0-90 | 45-90 | 45-90 | 45-90 |
| Lifting Force(T) | 12 | 16 | 24 | 30 |
| Feed Force(T) | 6 | 8 | 12 | 15 |
| Hydraulic Mud pump flow | 30-90(L/min) | 30-90(L/min) | 90-180(L/min) | 90-180(L/min) |
| Hydraulic Mud pump power | 4-7(MPA) | 4-7(MPA) | 4-7(MPA) | 4-7(MPA) |
| Dimension | 4000*1900*1800mm | 4000*2000*1800mm | 5500*2100*2000mm | 6000*2200*2400mm |
| Weight | 4.3T | 4.5/5.5T | 6.5T | 7.5T |
Match BQ Core Rig to Your Exploration Depth – Start Now


10 Application Scenarios of the YG BQ Core Drilling Rig Machine
This full hydraulic BQ core drilling rig serves a broad range of geotechnical and mineral exploration projects:
- Metallic mineral exploration: Deep prospecting and detailed resource verification for ore bodies, with BQ and NQ as the most commonly selected core sizes.
- Non-metallic mineral survey: Geological evaluation for limestone, quartz, clay, and other mineral deposits.
- Geotechnical engineering investigation: Site characterization for large industrial plants and infrastructure projects.
- Dam foundation geological survey: Deep core sampling to assess bedrock integrity and identify weak zones for water retention structures.
- Tunnel advance geological prediction: Pre-drilling to detect faults, fractured zones, and water-bearing formations ahead of tunnel excavation.
- Highway and railway subgrade exploration: Collect continuous core samples to confirm bearing conditions along planned transport corridors.
- Hydrogeological investigation: Mapping aquifer layers and assessing groundwater flow for water resource planning.
- Shallow geothermal exploration: Core sampling to study rock strata and thermal conductivity for geothermal design.
- Slope stability investigation: Obtain core data to evaluate rock mass quality for landslide risk assessment.
- Tailings pond geological assessment: Subsurface investigation to check foundation stability and seepage risks of tailings facilities.
See Factory-Direct Pricing on Full Hydraulic Core Rigs – Request Quote


Tooling Selection: AQ, BQ, NQ, HQ, PQ, NTW, BTW, and SPT
| Tool Size | Typical Application | Core Diameter | Borehole Diameter | Drill Rod OD | Best For |
| AQ | Very shallow, small-diameter exploration | ≈27 mm | ≈48 mm | ≈44 mm | Limited use; shallow/small probe holes |
| BQ | Deep mineral exploration, slim holes | ≈36.5 mm | ≈60 mm | ≈55.6 mm | Deep slim-hole coring, cost-efficient |
| NQ | Medium-depth resource definition | ≈47.6 mm | ≈75.7 mm | ≈69.9 mm | Most common for mineral & geotech work |
| HQ | Larger core for detailed geological logging | ≈63.5 mm | ≈96 mm | ≈88.9 mm | High-quality core observation, weak ground |
| PQ | Large-diameter, high-recovery programs | ≈85 mm | ≈122.6 mm | ≈114.3 mm | Bulk sampling, very broken formations |
| NTW | Thin-wall medium coring | ≈50.6 mm | ≈60 mm | — | Lightweight coring with higher core diameter |
| BTW | Thin-wall shallow coring | ≈36.5 mm | ≈60 mm | — | Slim shallow holes, faster penetration |
| HTW | Thin-wall larger core | ≈66.6 mm | — | — | Larger thin-wall core for engineering geology |
| SPT | Standard penetration test (no core) | — | — | — | Soil N-value testing for geotechnical work |
This full hydraulic core rig supports a wide lineup of standard exploration tooling, so you can adapt to different project requirements without replacing the main drill unit.
- BQ, NQ, HQ, PQ wireline core barrels
- NTW and BTW wireline coring systems
- SPT standard penetration test assembly
The core advantage here is that the main hydraulic power unit, rotary head and feed system are designed to accommodate these different sizes. That said, you still need matching core barrels, bits and adapters for each specification. Tooling from different manufacturers may have thread and dimensional differences, so third-party wireline tools need pre-verification before deployment.
Note: Core diameter, borehole diameter, and drill rod OD values above are industry-standard references and may vary slightly by manufacturer. SPT is a testing tool that produces no continuous core. Please confirm the exact tooling package with YG for your selected depth and formation.
Get Your Free Quote Today – Fast Response


Frequently Asked Questions About Core Drilling Rigs Compatible with BQ Drilling Tools
A1: BQ provides a smaller core and is used in shallow to medium exploration. NQ provides a larger core and is used in standard exploration. The choice depends on the required sample volume, the depth, and the ground conditions.
A2: Mixing brands requires verification of the connection thread, through-bore, chuck, and core barrel length. Do not assume that different brands are interchangeable.
A3: Core recovery in broken zones depends on the core barrel, the drilling fluid, the drilling parameters, hole cleaning, and casing. A fixed recovery rate cannot be guaranteed.
A4: SPT can be configured as part of a combined program. The SPT hammer system and the drill string must be confirmed for compatibility.
A5: Larger tooling size increases torque, hoisting load, and hydraulic demand. The hydraulic configuration must be reviewed before upgrading.
A6: Both can run BQ tooling. The full hydraulic rig is suitable for deeper holes and higher core recovery standards. The spindle-type rig is limited to shallow holes.

