Double Cylinder Shear

excavator double cylinder shear
excavator double cylinder shear
excavator double cylinder shear
double cylinder metal shear
double cylinder metal shear

If your demolition or metal recycling jobs are slowed down by unstable cutting force, crooked jaws, and frequent jams when cutting thick steel profiles, our double cylinder shear for excavators is built to solve exactly these headaches. Many contractors start with single-cylinder hydraulic shears, only to find they struggle with heavy, rigid metal; uneven force causes jaw deflection and shorter service life. Our excavator double-cylinder shear uses two synchronized hydraulic cylinders to deliver balanced, consistent power, ideal for heavy metal cutting tasks on site.

This hydraulic scrap shear is an excavator attachment designed to grab and cut steel material directly. Unlike single-cylinder shears that push from one side, the twin hydraulic cylinders work in sync to drive the jaw. The balanced force keeps the jaw aligned during cutting, reducing side load and wear on pivot pins and blades. The large jaw opening accommodates bulky steel pieces, while high cutting force quickly shears rebar, steel beams, pipes, and scrap vehicle frames. It connects to your excavator’s existing hydraulic circuit, turning your carrier machine into a mobile metal cutting workstation.

Our proposed range covers selected excavators from 6 to 30 tonnes. Before recommending a model, we check your excavator, hydraulic supply, material dimensions, and working conditions—not simply the largest opening or advertised cutting force.

Send your excavator model and clear material photos. We can identify the technical details needed for a matched quotation.

Get Your Free Quote in 12 Hours

Technical Specifications for YG Excavator Hydraulic Dual-Cylinder Shear Attachments(Suitable for 6-30t Excavators)

Item / ModelUnitYG-80YG-180YG-280
Suitable Excavatorton6-810-1820-30
WeightKG80015402800
Working Pressurebar27300320
Required FlowL/min80-150180-250230-280
Opening Amm505680740
Jaw Depth Bmm500500550
Overall Length Cmm157019502207
Blade Length D1/D2mm260+175325+210305+260
Central Cutting Forceton62106156
Tip Cutting Forceton4373100
Opening Cyclesec2.12.42.5
Closing Cyclesec3.84.14.3

Note: We can customize the connecting bracket to fit your excavator. This attachment works for mainstream excavator brands including Caterpillar, Komatsu, Hitachi, Volvo, Develon, Hyundai, SANY, XCMG and Kobelco. Confirm your excavator model, hydraulic flow and pressure before ordering.

Match Double Cylinder Shear to Your Excavator (6T–30T Options) – Start Now

double cylinder hydraulic shear
double cylinder hydraulic shear
hydraulic shear attachment for excavator
hydraulic shear attachment for excavator

How Does an Excavator Double Cylinder Shear Work?

The excavator supplies hydraulic oil to the attachment. Hydraulic pressure acts through the cylinders and jaw mechanism to generate cutting force at the blades.

The jaws close around suitable material and shear it at the cutting edges. Where a synchronization mechanism is fitted, it coordinates jaw movement. The exact arrangement must be confirmed for the selected model.

Cutting performance depends on more than cylinder count:

  • Hydraulic pressure and available flow.
  • Cylinder dimensions and mechanical leverage.
  • Blade geometry, condition, and clearance.
  • The material’s strength, shape, and thickness.
  • Position of the material within the jaws.

7 Main Applications of YG Excavator Double Cylinder Shear

  1. Steel structure demolition: Cut I-beams, channel steel, and steel frames during factory and building teardown.
  2. End-of-life vehicle dismantling: Cut chassis, frames, and metal components in scrap yards.
  3. Rebar cutting: Process reinforced steel from concrete demolition waste.
  4. Scrap profile & pipe cutting: Handle waste steel pipes, angle steel, and metal profiles.
  5. Bridge demolition: Remove steel bridge components in infrastructure projects.
  6. Ship scrapping: Cut thin and medium-thickness steel plates on vessel recycling sites.
  7. Municipal demolition works: Fast, controlled cutting for urban renewal projects.

If you also need to sort and stack metal scraps after cutting, you can check out our excavator grapple for matched site handling. For lighter demolition work, our standard hydraulic excavator shear is an alternative for your reference.

See Factory-Direct Pricing on Hydraulic Double Cylinder Shears – Request Quote

double cylinder demolition shear
double cylinder demolition shear
hydraulic demolition shear for excavator
hydraulic demolition shear for excavator

Hydraulic Matching: Avoid a Slow or Unsuitable Setup

Pressure helps determine available cylinder force. Flow affects movement speed. Both must be assessed together.

An excavator may reach the listed pressure yet provide insufficient flow for the expected cycle. Conversely, a large attachment can exceed the carrier’s handling limits even where hydraulic power appears adequate.

YG’s published selection guidance emphasizes balancing attachment size, excavator payload, hydraulic pressure, and flow.

Before ordering, confirm:

  • Auxiliary flow at the required operating pressure.
  • Relief settings and permitted limits.
  • Supply and return connections.
  • Return-pressure requirements.
  • Rotation requirements, where applicable.
  • Hose routing and mounting arrangement.

Do not assume rotation or an additional hydraulic circuit is included unless specified.

Compatibility with Major Excavator Brands

We can assess configurations for Caterpillar, Komatsu, Hitachi, Volvo, Develon, Hyundai, SANY, XCMG, and Kobelco machines within the relevant carrier range.

Provide the exact model, operating weight, hydraulic specifications, and mounting dimensions. We also review the intended working reach and installation arrangement. Mechanical fit alone does not establish safe handling capability.

YG’s hydraulic-shear range is offered for different excavator brands, with configuration selected around the actual machine and operating conditions.

Wear Parts and Maintenance: Compare Operating Costs

Blade condition and clearance matter to cutting performance. Before purchasing a hydraulic scrap shear, ask which components are replaceable and which adjustments require workshop support.

Request confirmation of:

  • Blade part numbers and replacement procedures.
  • Whether blade indexing is permitted.
  • Clearance inspection and adjustment requirements.
  • Pin, bushing, and cylinder maintenance.
  • Lubrication points and intervals.
  • Recommended initial spare parts.
  • Availability and quoted lead times for replacements.

Do not assume all blades have reversible edges or that replacement parts are interchangeable across models.

Use the supplied manual for inspection and isolation procedures. Never clear trapped material while the attachment remains energized.

Request OEM Customization for Your Brand – Learn More

double cylinder shear for excavator
double cylinder shear for excavator
excavator hydraulic shear manufacturer
excavator hydraulic shear manufacturer

Frequently Asked Questions About Hydraulic Dual-Cylinder Shears for Excavators

Q1: What excavator tonnage does this double cylinder shear fit?

A1: Our YG series double cylinder shear covers 6–30 ton excavators, with three models: YG-80, YG-180, and YG-280 for different working loads.

Q2: Can it be mounted on Caterpillar, Komatsu, SANY, and other well-known excavator brands?

A2: Yes. We custom-make mounting brackets to match most mainstream excavator brands: Caterpillar, Komatsu, Hitachi, Volvo, Develon, Hyundai, SANY, XCMG, Kobelco. Please share your excavator model for confirmation.

Q3: What materials can this hydraulic scrap shear cut?

A3: It is designed for steel: rebar, steel beams, steel pipes, vehicle frames, thin steel plates, and metal profiles. It is not built for rock or concrete crushing.

Q4: What is the difference between double cylinder shear and single cylinder shear?

A4: Double cylinder shear uses two synchronized hydraulic cylinders for balanced force, less jaw offset, and better performance on thick steel. Single cylinder shears are simpler and cheaper but easier to deflect under heavy load.

Q5: Can I get a custom bracket for my excavator?

A5: Yes. Custom bucket linkages and mounting brackets are available. We need your excavator pin size, center distance, and hydraulic parameters to produce the matched bracket.

Q6: How long is the cutting cycle?

A6: Cycle time varies by model. YG-80 finishes closing in 3.8 seconds and opening in 2.1 seconds; larger models take slightly longer, as shown in the spec sheet.

    Please feel free to give your inquiry in the form below. We will reply in 24 hours.

    Product Model:

    Your Name(required):

    Your Email(required):

    Your Phone(required):

    Your country:

    Your Whatsapp(required):

    Your Message(required):

    Related Post